BuildBlock ICF
4″-8″

BuildCrete Stucco, Plaster & Pool Plaster is the strongest synthetic coating product on the market. A truly green coating system designed for indoor and outdoor applications. This one-coat system delivers exceptional results beyond any other coating system on the market.

BuildCrete

BuildBlock Building Systems provides a complete range of ICF products and accessories to ensure your ICF job is worry-free. No matter the size, style, or complexity BuildBlocks ICFs deliver superior results.

BuildCrete Pool Plaster - BuildCrete Stucco

BuildCrete Plaster

BuildCrete Plaster

 BuildCrete Plaster Benefits

  • Provides a hard, durable single 3/16-inch thick coat applied directly over EPS, up to 8500+ PSI compressive strength.
  • Easy to mix using standard plaster tools & techniques.
  • Applied in a scratch and double-back one-coat with a fiberglass mesh.
  • Easily painted or stained.
  • Roller textures and other finishes can be applied rapidly.
  • Environmentally friendly.
  • Emits ZERO pollutants.
  • Uses less water than other products.
  • USEPA & CA indoor air quality VOC standards.
  • Resists cracking, indenting, and abrasion.
  • Code approved and tested to ASTM E-136, ASTM E-84, and NFPA-286. standards.

BuildCrete Plaster is an ultra-high-performance finish for architectural and industrial applications. This abuse-resistant interior v

eneer plaster is designed for buildings that require extreme abrasion resistance.

BuildCrete Plaster is a single product application that provides the ultimate in resistance to abrasion and indent far exceeding abuse type drywall. This product is formulated for industrial strengths exceeding 8,500 psi and provides an attractive, smooth or textured finish over a variety of substrates, such as gypsum board, cement board, CMU block, mag-board, fiberboard, monolithic concrete, and unit masonry. Typical application thicknesses is 3/16″ depending on the needs abuse resistance.

The BuildCrete Plaster mix contains all needed ingredients so no sand is added at the jobsite to minimize the risk of mixing errors. Produced using environmentally-friendly manufacturing techniques, BuildCrete Plaster is easy to mix and apply using conventional plaster tools and techniques. It is applied in a scratch and double-back one-coat application along with a 4.5 oz or 11 ounce or heavier fiberglass mesh depending on the abuse resistance needed. For texture finishes, complete texturing after the plaster has firmed up and before the final set. Polyurethane roller texture finishes can also be used and rapidly finished. One thin coat is applied directly over the EPS foam, a fiberglass mesh is embedded and then covered over with the same material giving about 3/16″ finished thickness.

BuildCrete Plaster was specifically developed for the toughest industrial applications, but it is also an ideal finish for walls in homes, schools, universities, restaurants, medical facilities, hotels, commercial offices, government/military buildings, correctional facilities, multi-family housing, and other high-traffic, high-abuse applications. The strength and abrasion and abuse-resistance features also provide the means for reduced long-term maintenance costs. Architects and designers can also take advantage of the wide range of decorative options of this product. Besides many types of smooth and textured finishes, BuildCrete Plaster can be easily painted or stained. It is designed to be environmentally responsible and emits zero pollutants, and uses less water than similar products currently on the market.

All BuildCrete Plaster products exceed USEPA and California indoor air quality and VOC standards and conserve water compared to other similar products. Abuse-resistant features such as resistance to cracking, indentation, and abrasion, coupled with ease of installation, fire protection, design options, and resistance to mold and gives BuildCrete Plaster unparalleled versatility inside any structure.

A Level III (highest) abuse resistance is achieved by applying a 3/16″ thickness and it replaces fragile 1/2″or 5/8″ gypsum board over ICF walls and ceilings. BuildCrete Plaster is tested and code approved for ICFs to ASTM E-136, ASTM E-84, and NFPA-286 code compliance by Intertek.

BuildCrete Pool Plaster

BuildCrete Pool Plaster is a true one-coat plaster designed to adhere directly to EPS foam or other pool building materials. BuildCrete has been used on ICF construction for its durability, strength, and ease of application. It allows pool builders to be green without complexity, saving time and money on the jobsite, and creating a finish that will last much longer than other plasters or finishing materials.

BuildCrete Pool Plaster Benefits

  • Provides a hard, durable finish. A single 3/16-inch thick coat applied on the bottom of the pool and 3/8-inch on the sides, directly over EPS delivers 3500+ PSI compressive strength.
  • Highly resistant to mold and mildew growth.
  • Impact and abrasion-resistant.
  • Resistant to freeze and thaw damage.
  • Single-day hand or machine application
  • Arrives in bags to be mixed with water on the job site.
  • Applies directly over EPS
  • Highly resistant to sulfate attack
  • Silica free

BuildCrete Stucco

buildcrete-stucco-and-plaster-4-color-spot_BuildCrete Stucco & Plaster

BuildCrete Stucco is a true one-coat stucco designed to adhere directly to any EPS foam, CMU block, DensGlass, Securock, concrete, and other building materials. BuildCrete has been used on ICF construction for its durability, strength, and ease of application. It allows contractors to be green without complexity, compromising performance, or high cost.

BuildCrete Stucco Benefits

  • Provides a hard, durable single 3/16-inch thick coat applied directly over EPS, 3500+ PSI compressive strength.
  • Noncombustible building material, Zero flame spread, and smoke-developed indices.
  • Highly resistant to water, mold, and mildew growth.
  • Impact and abrasion-resistant.
  • Low shrinkage minimizing cracking.
  • Resistant to freeze and thaw damage.
  • Single-day hand or machine application; prime and paint once cured.
  • Qualifies for LEED points.
  • Arrives in bags to be mixed with water on the job site.
  • Applies directly over EPS.
  • Noncombustible building material
  • Zero flame spread and zero smoke developed indices
  • Single-day application
  • Low shrinkage minimizing cracking
  • Highly resistant to sulfate attack
  • Low permeability
  • Hand or machine applied
  • Silica free

BuildCrete Brochures & Manuals

BuildCrete Product Installation Manual
Notice: JavaScript is required for this content.
BuildCrete Stucco Plaster Brochure
Notice: JavaScript is required for this content.
2 documents

BuildCrete Specifications

Product Name
Bag Weight
Thickness
Coverage Sq. Ft.
SF Weight
BuildCrete Stucco
75 lbs.
1/8"
55 ft²
1.36 lbs.
BuildCrete Stucco
75 lbs.
3/16″
45 ft²
1.67 lbs.
BuildCrete Stucco
75 lbs.
1/4″
27 ft²
2.78 lbs.
BuildCrete Plaster
75 lbs.
1/8″
53 ft²
1.42 lbs.
BuildCrete Plaster
75 lbs.
3/16″
42 ft²
1.79 lbs.
BuildCrete Plaster
75 lbs.
1/4″
26 ft²
2.88 lbs.
BuildCrete Ballistic
75 lbs.
1″
7.5 ft²
10.00 lbs.
BuildCrete Ballistic
75 lbs.
1-3/8″
4.81 ft²
15.59 lbs.
BuildCrete Ballistic
75 lbs.
1-1/2″
4.41 ft²
17.01 lbs.
BuildCrete Ballistic
75 lbs.
2″
3.75 ft²
20.00 lbs.
BuildCrete Pool Plaster
75 lbs.
1/8"
55 ft²
1.36 lbs.
BuildCrete Pool Plaster
75 lbs.
3/16"
45 ft²
1.67 lbs.
BuildCrete Pool Plaster
75 lbs.
1/4"
27 ft²
2.78 lbs.
BuildCrete Pool Plaster
75 lbs.
3/8"
21 ft²
3.57 lbs
BuildCrete Pool Plaster
75 lbs.
1/2"
15 ft²
5.00 lbs.

Gallery